show event

Displays events on the controller.
Syntax
show event
Modes

Privileged EXEC mode

Usage Guidelines

This command is supported on all the controllers including the SmartZone Data Plane.

Examples

The following example shows partial output from the show event command run on a SZ300 controller. 

device# show event

                            Event
No. Datetime                Code   Event Type        Severity       Activity
--- ----------------------- ------ ----------------- -------------- ----------------------------------------------
1   2020-04-07 15:57:57 GMT 508    Data plane IP     Informational  Data plane [RRR-SZ300-D1@24:79:2A:00:0B:18] 
                                   address updated                  IP address changed.                         
2   2020-04-07 15:57:56 GMT 508    Data plane IP     Informational  Data plane [RRR-SZ300-D0@24:79:2A:00:0B:10] 
                                   address updated                  IP address changed.                             
3   2020-04-07 15:57:48 GMT 2502   Node IPv6 address Informational  Network interface [pow0] on node [RRR-SZ300-D0]
                                   deleted                          deleted IPv6 address [2148::2679:2aff:fe00:b10].
4   2020-04-07 15:57:48 GMT 2502   Node IPv6 address Informational  Network interface [pow0] on node [RRR-SZ300-D1]
                                   deleted                          deleted IPv6 address [2148::2679:2aff:fe00:b18].
5   2020-04-07 15:56:00 GMT 508    Data plane IP     Informational  Data plane [RRR-SZ300-D0@24:79:2A:00:0B:10] 
                                   address updated                  IP address changed.                            
6   2020-04-07 15:56:00 GMT 508    Data plane IP     Informational  Data plane [RRR-SZ300-D1@24:79:2A:00:0B:18]
                                   address updated                  IP address changed.                           
7   2020-04-07 15:55:52 GMT 2501   Node IPv6 address Informational  Network interface [pow0] on node [RRR-SZ300-D1]
                                   added                            added IPv6 address [2148::2679:2aff:fe00:b18].

The following example shows partial output from the show event command run on a vSZ-D controller. 

device# show event 

2019-03-18T17:28:57+00:00 vDP-243 vdp_cli[566]: @@99214,dpUserLogout,
"dpKey"="97H0T58MTPWU263XS6N432G7X55Q000C297375FB000C29737505","source"="10.206.67.253","account"="admin"

2019-03-18T17:38:47+00:00 vDP-243 vdp_cli[27580]: @@99221,dpSessionIdleTerminated,
"dpKey"="97H0T58MTPWU263XS6N432G7X55Q000C297375FB000C29737505","source"="Console"

2019-03-18T17:38:47+00:00 vDP-243 vdp_cli[27580]: @@99214,dpUserLogout,
"dpKey"="97H0T58MTPWU263XS6N432G7X55Q000C297375FB000C29737505","source"="Console","account"="admin"

2019-03-21T11:19:05+00:00 vDP-243 vdp_cli[14105]: @@99212,dpUserLogin,
"dpKey"="97H0T58MTPWU263XS6N432G7X55Q000C297375FB000C29737505","source"="10.206.67.253","account"="admin"
Parent topic: Show Commands