show running-config

Displays the current system configuration or the current configuration for the specified command.
Syntax
show running-configcommand-name[command-options]

DP syntax

show running-config[dhcp|nat]
Parameters
command-namecommand-options
Display the running configuration for the specified command and any options, if applicable.
Modes

Privileged EXEC mode

Usage Guidelines

Use the command to view the current configuration of a specific command or to view the entire configuration. Most configuration commands are available with this command, use the Tab+Tab or ? to view the supported list.

Note: Viewing the entire running configuration may require you to scroll down several "pages" of content.

On vSZ-D controllers only DHCP and NAT configuration information is displayed.

Is this correct?

This command is supported on all the controllers including the SmartZone Data Plane.

Examples

The following example displays the current WLAN configuration for the zone named Zone-699-Dual. 

device# show running-config zone Zone-699-Dual wlan

   No.   Name                SSID                Auth Method              Encryption
   ----- ------------------- ------------------- ------------------------ --------------
   1     5.2.1_ENG_MADHAV_S  5.2.1_ENG_MADHAV_S  OPEN                     WPA2
         GRE_SZ300           GRE_SZ300

The following example displays the current NTP server configuration. 

device# show running-config ntp-server

   Current System Time       : 2020-04-14 16:24:50 UTC
   Current System UTC Time   : 2020-04-14 16:24:50 UTC
   Current System Time Zone  : UTC
   NTP Server                : ntp.ruckuswireless.com
Parent topic: Show Commands