show data-plane

Displays information about the data planes on the controller.
Syntax
show data-plane [ dp-name [ ip route | ping host ] ]
Parameters
dp-name
Data plane name.
ip route
Displays the IP routing table for the specified data plane.
ping host
Displays the ping information to a specific IP host address for the specified data plane.
Modes

Privileged EXEC mode

Usage Guidelines

This command is supported on the SmartZone 300 and vSZ-H controllers only.

Control planes and data planes are used to control traffic. The control plane manages and exchanges routing table information. The control plane packets are processed by the router to update the routing table information. The data plane forwards the traffic along the path according to the logic of the control plane.

Run the show data-plane command to view information and traffic for the specified data plane.

Examples

The following example shows output from the show data-plane command for the SALES-SZ300-D0 data plane 

device# show data-plane SALES-SZ300-D0
   
   SALES-SZ300-D0
   ----------------------------------------------------------------
   Serial Number                   : 24:79:2A:00:0B:10
   Model                           : SZ300
   Firmware                        : 5.2.1.0.270
   MAC Address                     : 24:79:2A:00:0B:10
   IP Address                      : 10.148.124.36
   IPv6 Address                    : 2148::4e8:34ad:18d4:e3d2
   Status                          : Managed

   Access and Core Tunnel Summary
   ----------------------------------------------------------------
   Ruckus GRE Tunnels              : 0
   Access L2oGRE Tunnels           : 0
   Access Q-in-Q Layer 2 Tunnels   : 0
   Core L2oGRE Tunnels             : 0
   Core L3oGRE Tunnels             : 0
   GGSN Count                      : 0
Parent topic: Show Commands