show ip

Displays information about the IP static route configured on the controller.
Syntax
show ip routestatic
Parameters
routestatic
Displays IP static route information.
Modes

Privileged EXEC mode

Usage Guidelines

This command is supported on all SmartZone platforms except SmartZone Data Plane controller.

Examples

The following example shows output from the show ip route static command. 

device# show ip route static

Static Routes
-------------------------------------------------------------
No. Network Address Subnet Mask   Gateway    Interface Metric
--- --------------- ------------- ---------- --------- ------
1   10.1.31.0       255.255.255.0 172.19.9.1 Control   0
Parent topic: Show Commands