show sdlan summary

Displays the brief information of the SD-LAN.

Syntax

show sdlan
                  				summary

Command Default

No command default.

Modes

Network mode

The show sdlan summary command displays the following information.

Output field	Need Inputs - Please share the description for these parameters
Total VLANs	Total number of active VLANs.
Total Access Clients	Total number of clients on all APs whose traffic is tunneled to Edge.
Total Uplink Clients	Total number of clients whose MACs are learnt on the uplink ports.
Total AP-Tunnels	Total number of tunnels from all APs.
Total Peer-Tunnels	Total number of peer tunnels.

Usage Guidelines

Need Inputs - Please share the Usage Guidelines

This command is supported only on the RUCKUS Edge device.

Examples

The below example displays the SD-LAN operation information of Edge in Data Center.

Network# show sdlan summary

Total VLANs: 7
Total Access Clients: 1
Total Uplink Clients: 2
Total AP-Tunnels: 11
Total Peer-Tunnels: 2

The below example displays the SD-LAN operation information on DMZ Edge.

Network# show sdlan summary

Total VLANs: 1
Total Access Clients: 0
Total Uplink Clients: 0
Total AP-Tunnels: 0
Total Peer-Tunnels: 1

History

Release version	Command history
2.1.0	Supporting multi-venue feature.
1.0.0	This command was introduced.