show peer-tunnel-ka

This command displays thestatus of the peer-tunnel keepalive.
Syntax
show peer-tunnel-ka
Command Default

No command default.

Modes

Network mode

The show peer-tunnel-ka command displays the following information.

Output field
Need Inputs - Please share the description for these parameters
TUNNEL-ID Displays the tunnel ID.
SERVICE Displays the service name.
SERVICE-ID Displays the serice ID.
Initiator Displays if the Edge device is an initiator or a responder. Yes indicates an initiator and No indicates a responder.
KA-TUN-STATUS Displays if the status of the keep alive tunnel Up or Down.
UP-TIME Dislays the time since the tunnel is up. The value of this is current time - start time of the tunnel creation.
KA-TUN-STATE Displays th state of tunnel out. Foe example, INIT, CONNECTING, CONNECTED and VRRP_BACKUP_WAIT.
Local-Addr Displays the local IP address of the Edge device.
Remote-Addr Displays the peer IP address of the peer tunnel keepalive.
Usage Guidelines

This command is supported only on the RUCKUS Edge device.

Need Inputs - Please provide usage guidelines for this feature.
Examples

The below example displays the SD-LAN tunnel keepalive information on Data Center Edge.

Network# show peer-tunnel-ka
TUNNEL-ID SERVICE  SERVICE-ID Initiator KA-TUN-STATUS UP-TIME
1         SDLAN    2          Yes       Up            0Y0M0D 6h29m33s

KA-TUN-STATE      Local-Addr           Remote-Addr          Remote-Index
CONNECTED         172.20.20.72         172.20.20.106        0

Network#
=============When tunnel status is down===================
Network#
Network# show peer-tunnel-ka
TUNNEL-ID SERVICE  SERVICE-ID Initiator KA-TUN-STATUS UP-TIME
1         SDLAN    2          Yes       Down          -

KA-TUN-STATE      Local-Addr           Remote-Addr          Remote-Index
CONNECTING        172.20.20.72         172.20.20.106        0

The below example displays the SD-LAN tunnel keepalive information on DMZ Edge.

Network# show peer-tunnel-ka
TUNNEL-ID SERVICE  SERVICE-ID Initiator KA-TUN-STATUS UP-TIME
1         SDLAN    3          No        Up            0Y0M0D 6h29m20s

Local-Addr           Remote-Addr
172.20.20.106        172.20.20.72

Network#
=============When tunnel status is down===================
Network#
Network# show peer-tunnel-ka
TUNNEL-ID SERVICE  SERVICE-ID Initiator KA-TUN-STATUS UP-TIME
1         SDLAN    3          No        Down          -
History
Release version Command history
2.1.0 This command was introduced.
Parent topic: Show Commands