show route

Displays the vector packet processor (VPP) routing information.

Syntax

show route

Modes

Network configuration mode

Usage Guidelines

This command is supported only on RUCKUS Edge.

Examples

The below example displays the VPP routing information.

network# show route
0.0.0.0/0 via 10.176.153.129, metric=1
10.254.1.0/24 via 10.254.1.254, metric=1
10.176.153.0/24 via 10.176.153.217, metric=1
10.254.2.240/30 via 10.254.2.241, metric=1
10.254.2.244/30 via 10.254.2.245, metric=1
10.176.153.129/32 via 10.176.153.129, metric=1
10.176.153.130/32 via 10.176.153.130, metric=1
10.254.2.242/32 via 10.254.2.242, metric=1
10.254.1.1/32 via 10.254.1.1, metric=1
10.254.2.246/32 via 10.254.2.246, metric=1

History

Release version	Command history
1.0.0	This command was introduced.

Network commands

show route