show lacp

Displays LACP configuration details and status.
Syntax
show lacp [ member-port ] [ details ]
Parameters
member-port
Displays LACP status of the member port.
details
Displays detailed information of LACP configuration and status, including advanced metrics such as port state, LACP priority, and partner informationinformation LACP status of the port including active members.
Modes

Network mode

Examples

The following example shows sample output for the show lacp command. 

Edge-VM-1-867# network
Network# show lacp
                                                        actor state                      partner state                   
interface name            sw_if_index  lag interface    exp/def/dis/col/syn/agg/tim/act  exp/def/dis/col/syn/agg/tim/act
port2                     2            lag0               0   0   1   1   1   1   1   1    0   0   1   1   1   1   0   1
  LAG ID: [(ffff,08-35-71-13-68-73,0004,00ff,0001), (0001,8c-7a-15-3a-fe-42,4e21,0001,0009)]
  RX-state: CURRENT, TX-state: TRANSMIT, MUX-state: COLLECTING_DISTRIBUTING, PTX-state: PERIODIC_TX

The following example shows sample output for the show lacp port1 details command. 

Edge-VM-1-867# network
Network# show lacp port1 details
Number of interfaces: 2
  port1
    Good LACP PDUs received: 5616
    Bad LACP PDUs received: 0
    LACP PDUs sent: 197
    last LACP PDU received:        .44 seconds ago
    last LACP PDU sent:        .76 seconds ago
    Good Marker PDUs received: 0
    Bad Marker PDUs received: 0
    debug: 0
    loopback port: 0
    port_enabled: 1
    port moved: 0
    ready_n: 1
    ready: 1
    long timer: 0
    Actor
      system: 08:35:71:13:68:73
      system priority: 65535
      key: 6
      port priority: 255
      port number: 1
      state: 0x3f
        LACP_STATE_LACP_ACTIVITY (0)
        LACP_STATE_LACP_TIMEOUT (1)
        LACP_STATE_AGGREGATION (2)
        LACP_STATE_SYNCHRONIZATION (3)
        LACP_STATE_COLLECTIING (4)
        LACP_STATE_DISTRIBUTING (5)
    Partner
      system: 8c:7a:15:3a:fe:42
      system priority: 1
      key: 20001
      port priority: 1
      port number: 10
      state: 0x3d
        LACP_STATE_LACP_ACTIVITY (0)
        LACP_STATE_AGGREGATION (2)
        LACP_STATE_SYNCHRONIZATION (3)
        LACP_STATE_COLLECTIING (4)
        LACP_STATE_DISTRIBUTING (5)
      wait while timer: not running
      current while timer:       2.56 seconds
      periodic timer:      29.24 seconds
    RX-state: CURRENT
    TX-state: TRANSMIT
    MUX-state: COLLECTING_DISTRIBUTING
    PTX-state: PERIODIC_TX
History
Release version Command history
1.0.0 This command was introduced.
Parent topic: Show Commands