show sdlan info

Displays the current VLANs which are serviced by the SDLAN.
Syntax
show sdlan info
Command Default

No command default.

Modes

Network mode

Usage Guidelines

This command is supported only on the RUCKUS Edge device.

The show sdlan info command displays the following information.

Output field Description
Total VLANs Total number of VLANs currently bridged by SD-LAN.
VLAN VLAN identifier.
Type Whether the VLAN is created dynamically (due to reception of traffic).
BD_ID Identifier of the bridge-domain for this VLAN.
Uplink-Port Uplink port. If the VLAN traffic has to be bridged on core-port, uplink port will be a 802.1q sub-port on the core-port. If the VLAN traffic has to be tunneled to another Edge cluster, uplink port will be a tunnel port.
AP-Tunnels Number of AP tunnels for this VLAN. This indicate number of APs which have UEs assigned this VLAN and thus tunneling VLAN traffic to Edge.
Peer-Tunnels Number of tunnels to other RUCKUS Edge device for this VLAN.
Access-Clients Number of MACs that are learned on non-uplink ports for this VLAN.
Uplink-Clients Number of MACs that are learned on uplink ports for this VLAN.
Examples

The below example displays the SD-LAN operation information from Data Center to RUCKUS Edge

Network# show sdlan info

Total VLANs: 5
VLAN   Type      BD-ID  Uplink-Port           AP-Tunnels  Peer-Tunnels  Access-Clients  Uplink-Clients
100    dynamic   100    port1.100             1           0             1               1
110    dynamic   110    port1.110             1           0             1               0
120    dynamic   120    vxlan_gpe_tunnel3     2           1             1               1
200    dynamic   200    port1.200             2           0             1               1
220    dynamic   220    vxlan_gpe_tunnel8     1           1             1               1

The below example displays the SD-LAN operation information from DMZ to RUCKUS Edge.

Network# show sdlan info

Total VLANs: 2
VLAN   Type      BD-ID  Uplink-Port           AP-Tunnels  Peer-Tunnels  Access-Clients  Uplink-Clients
120    dynamic   120    port1.120             0           1             1               1
220    dynamic   220    port1.220             0           1             1               1
History
Release version Command history
2.1.0 Supporting multi-venue feature.
1.0.0 This command was introduced.
Parent topic: Show Commands