show lag

Displays the status and configuration details of Link Aggregation Groups (LAGs) in the system.

Syntax

show lag [ id ] [ details ]

Parameters

id: Displays the details of a specific LAG.
details: Displays detailed information of LAG including the mode, load balancing mechanism, and member interface details such as active members and device instance information.

Modes

Network mode

Examples

The following example displays the status of LAGs in the system.

Edge-VM-1-867# network
Network# show lag
Name                     tag           Idx    State  MTU (L3/IP4/IP6/MPLS)     Counter          Count
lag1                     none            7     down         1500/0/0/0

The following example displays the LAG details.

Edge-VM-1-867# network
Network# show lag details
lag1
  mode: lacp
  load balance: l34
  number of active members: 0
  number of members: 0
  device instance: 0
  interface id: 1
  sw_if_index: 7
  hw_if_index: 7

History

Release version	Command history
1.0.0	This command was introduced.

Network commands

show lag