show qinq-tunnel

Displays the details of Q-in-Q tunneling configurations for all interfaces or a specific interface.
Syntax
show qinq-tunnel { brief | ethernet unit/slot/port | lag lag-id }
Parameters
brief
Displays summarized information for the number of VLANs tunneled, the number of hardware resources used, and the ports for which selective Q-in-Q is enabled..
ethernet unit/slot/port
Displays tunneled customer VLANs (CVLANs) for the Ethernet interface.
lag lag_id
Displays tunneled CVLANs for the LAG interface.
Modes

User EXEC mode

Examples

The following example shows output for the show qinq-tunnel command for an ICX 8200 device when selective Q-in-Q tunneling with a CVLAN is configured. 

device> show qinq-tunnel

Total number of VLAN(s) tunneled: 2
Total number of HW resources used: 2
qinq enabled port(s): 1/1/1, 1/1/2

Port: 1/1/1    Number of CVLANs tunneled: 1
  Service VLAN: 200      Original VLAN: None (Untagged)    New CVLAN: 100

Port: 1/1/2    Number of CVLANs tunneled: 1
  Service VLAN: 200      Original VLAN: 100    New CVLAN: 75

The following example shows output for the show qinq-tunnel command for an ICX 8200 device when selective Q-in-Q tunneling is configured without a CVLAN. 

device> show qinq-tunnel

Total number of vlan(s) tunneled: 2
Total number of HW resource used: 2
Selective qinq enabled port(s):  1/1/1 1/1/2

Port : 1/1/1	  Number of CVLANs tunneled : 1
  Service vlan : 200	  Tunneled VLAN(s): untag


Port : 1/1/2	Number of CVLANs tunneled : 1
  Service vlan : 200	  Tunneled VLAN(s): 100

The following example shows output for the show qinq-tunnel command when the brief keyword is used. 

device> show qinq-tunnel brief

Total number of vlan(s) tunneled: 2865
Total number of HW resource used: 2865
Selective qinq enabled port(s):  1/1/1 1/2/2 lg1

The following example shows output for the show qinq-tunnel command for a specified Ethernet interface. 

device> show qinq-tunnel ethernet 1/1/1

Port : 1/1/1     Number of CVLANs tunneled : 206 
    Service vlan: 3000    Tunneled VLAN(s) : 2 to 3 5 6 7 100 to 200
    Service vlan : 3001   Tunneled VLAN(s):  400 to 500

The following example shows output for the show qinq-tunnel command for a specified Ethernet interface for an ICX 8200 device when selective Q-in-Q tunneling with a CVLAN is configured.

device> show qinq-tunnel ethernet 1/1/1

Port : 1/1/1 Number of CVLANs tunneled : 1
   Service vlan : 1000	  Original VLAN :  10   New CVLAN : 100

History
Release version Command history
10.0.20 The output for this command was modified so that information is displayed for new CVLANs for devices.
Parent topic: Show Commands