show issu status
Runs a pre-ISSU check and monitors the status of the current upgrade.
Modes
Privileged EXEC mode
Usage Guidelines
Use this command to show the ISSU status before or during an upgrade.
Examples
If an upgrade is not in progress, this command displays information about whether the system is ready for an upgrade.
device# show issu status Topology is Ring Yes Standby Present Yes Standby ready for upgrade Yes Flash use in progress No Secure Setup in progress No ISSU in progress or aborted No Election pending No Election in progress No Reload pending No CPU utilization high No All units in ready state Yes Primary Image is upgrade compatible Yes Secondary Image is upgrade compatible Yes Startup config and Running Config Same Yes User in Config mode No System ready for issu ISSU not in progress
If an upgrade is completed, this command displays the following information,
device# show issu status Last upgrade time 00:02:19.367 GMT+00 Tue Mar 20 2016 The older image before-ISSU SPR08050b433.bin Topology is Ring Yes Standby Present Yes Standby ready for upgrade Yes Flash use in progress No Secure Setup in progress No ISSU in progress or aborted No Election pending No Election in progress No Reload pending No CPU utilization high No All units in ready state Yes Primary Image is upgrade compatible Yes Secondary Image is upgrade compatible Yes Startup config and Running Config Same Yes User in Config mode No System ready for issu ISSU not in progress
History
| Release version | Command history |
|---|---|
| 08.0.50 | This command was introduced. |
| 08.0.70 | Support for Campus Fabric (SPX) systems was added. (Note: FastIron 9.0.00 and later releases do not support Campus Fabric.) |