`show erspan`

Displays information for the Encapsulated Remote Switched Port Analyzer (ERSPAN) profiles.

Syntax

show erspan profile { profile-number | all }

Parameters

profile-number: Specifies a profile. Valid values range from 1 through 4.
all: Specifies all profiles.

Modes

User EXEC mode

Usage Guidelines

This command is not supported for ICX 8100 devices.

The show erspan command displays the following information:

Output field	Description
Profile	The profile number.
Type	The type of profile (ERSPAN).
Mirror destination	Indicates whether the mirror destination is reachable or unreachable.
Destination IP	The IP address of the destination host.
Destination MAC	The MAC address of the destination host.
Source IP	The IP address of the source router.
Source MAC	The MAC address of the source router.
Ports monitored	The ports that are being monitored.
HW destination id for each device	The hardware destination ID for each device being monitored. The ID is in the form stack_id/device:dest_id.

Examples

The following example displays information for an ERSPAN profile, "Profile 1". In this example, ERSPAN mirroring has been enabled for profile 1, and the mirror destination is reachable.

device> show erspan
 
 Profile 1
 Type             ERSPAN
 Mirror destination Reachable.
 Destination IP   70.1.1.2
 Destination MAC  d4c1.9e16.a541
 Source IP        40.1.1.1
 Source MAC       c0c5.207c.2314
 Outgoing port    1/2/3
 Outgoing VLAN    50
 Outgoing VE      50
 Ports monitored:
  Input monitoring      : (U1/M1)   1
  Output monitoring     : (U1/M1)   1
 HW destination id for each device:
 stack_id/device:dest_id   1/1:1

History

Release version	Command history
08.0.40	This command was introduced.

Show Commands

show erspan

`show erspan`