sg-aclv6 enable

Enables Source Guard ACLs on the DHCPv6 server.

Syntax

sg-aclv6
                  enable

no sg-aclv6
                  enable

Command Default

Source Guard ACLs on the DHCPv6 server are not enabled.

Modes

Global configuration mode

Usage Guidelines

To apply this command, you need to execute the write memory command and then reboot the device using the reload command.

Examples

The following example enables the Source Guard ACLs on the DHCPv6 server

device# configure terminal
device(config)# sg-aclv6 enable
device(config)# exit
device# write memory

History

Release version	Command history
10.0.20b_cd1	This command was introduced.