`rtt`

Configures the minimum and maximum round-trip time (RTT) for validation purposes for an IP Performance Metrics (IPPM) profile.

Syntax

rtt { max | min } value

rtt range value to value

no rtt { max | min } value

no
                  					rtt

range value to value

Command Default

The RTT is not configured by default.

Parameters

max value: Specifies the maximum RTT value in milliseconds. Valid values range from 1 through 200.
min value: Specifies the minimum RTT value in milliseconds. Valid values range from 1 through 200.
range value to value: Specifies a range for average RTT values in milliseconds. Valid values range from 1 through 200.

Modes

IPPM profile configuration mode

Usage Guidelines

The no form of the command removes the configured RTT from the profile.

Examples

The following example configures a range for average RTT values as 20 to 30 milliseconds for an IPPM profile named "test1".

device# configure terminal
device(config)# ippm profile test1 type icmp-echo
device(config-icmp-echo-test1)# rtt range 20 to 30

The following example configures the maximum RTT value to 65 milliseconds. The minimum RTT value defaults to 1.

device# configure terminal
device(config)# ippm profile test1 type icmp-echo
device(config-icmp-echo-test1)# rtt max 65

The following example configures the minimum RTT value to 20 milliseconds. The maximum RTT value defaults to 200.

device# configure terminal
device(config)# ippm profile test1 type icmp-echo
device(config-icmp-echo-test1)# rtt min 20

History

Release version	Command history
10.0.20	This command was introduced.

rtt