From the event code 803 an alarm is raised for every event. A single event triggers
a single alarm.
Auto Clearance
The alarm code is auto cleared with the event code 802.
Attribute
“clusterName”=”xxx”, “nodeName”=”xxx”,
“nodeMac”=” xx:xx:xx:xx:xx:xx”
Displayed on the web interface
New node [{nodeMac}] ([{nodeName}]) failed to join cluster [{clusterName}]
Description
This alarm is triggered when a node fails to join a cluster session. The web interface
displays the error message.
Recommended Actions
When the operation fails, the user can run the
join process. If it continues
to fail, please send the complete system log files (stored in the
path - /opt/ ruckuswireless/controller/log/system for
analysis to RUCKUS support. Possible causes are:
The joining node is unable to complete the syncing of data in time. This could be
due to the existing node performing compaction/repair etc.
The communication between the nodes may be broken. This could cause the operation
to timeout such as IP address change or due to other events, which affects the network.
Usually, it does not last for a long period of time.