Diameter peer add error Note: This alarm is not applicable for vSZ-H. Diameter peer add error alarm Alarm Diameter peer add error Alarm Type diaPeerAddError Alarm Code 1407 Severity Critical Aggregation Policy A single event triggers a single alarm. Attribute “ctrlBladeMac”=”aa:bb:cc:dd:ee:ff” “mvnoId”=12 “srcProcess”=”<Application Name>” “realm”=”ruckus.com" “originHost” = “Node1” "SCGMgmtIp"="2.2.2.2" “peerIp” = “3.3.3.3” “peerName” = “OCS1” “peerRealmName” = “organization.com” “desc” = ”Failed to add Peer” “cause”=”Cause Value” Displayed on the web interface [{srcProcess}] Failed to add Peer [{peerName}], Realm [{peerRealmName}] on {produce.short.name} [{SCGMgmtIp}] Description This alarm is triggered when the diameter stack fails to add a peer to the peer table. Recommended Actions Check if the peer IP address is reachable and if the peer responds to the configured port. Parent topic: harp://6a7214064c282d8ad6c44b90/pr/ORIGINAL/RUCKUS%20SmartZone%20(LT-GA)%20Alarms%20and%20Events%20Reference%20Guide%20(SZ144_vSZ-E_vSZ-H),_v1_GUID-0D5774F3-3095-499A-9B2D-C4F479DA5900/System%20Alarms=GUID-18891F18-FF95-4DF8-8A68-5D02C22BB37E=7=en-US=.xml