Smart Monitor Feature
Smart Monitor feature is going to check AP’s uplink connectivity periodically and turn off the WLANs according to the connection status. Note that Smart Monitor feature can be enabled / disabled perZone and AP.
Smart Monitor will use arping as checking method. AP will check the connectivity with default gateway which is fetched from routing table automatically. According to the result, Smart Monitor will make the decision to turn on/off the WLANs.
AP will send an event to notify SCG that smart monitor has turned off WLANs when AP lost its gateway. But there is an issue occurred that AP has already lost its gateway, it also could not reach the SCG. Thus, the event cannot be sent until the connection is recovered.
- When smart monitor turned off WLANs, AP sends a log to syslog. Thus the related log is got locally from AP’s syslog.
- AP should send this event to SCG once Smart Monitor recovered the WLAN. The event should carry the timestamp to record when WLANs has been turned off and on by smart monitor.