Main Configuration Steps

These are the major steps to follow - in order - to configure Network Segmentation. There are some steps that must be performed in the Cloudpath UI and some steps that must be performed on the vSZ controller. Do complete all steps by following the instructions in the following sections:
  1. Configuring the Integrated System in the Cloudpath UI
  2. Configuring the vSZ Controller to Prepare for Network Segmentation
  3. Prerequisites - "ICX Switch Preparation for Network Segmentation" bullet point (if ICX switches are to be part of the network segmentation).
    Note: All ICX switches must be upgraded to the firmware version 09010d or later.
    Phong - Plz confirm this is what you wanted here, and that all necessary switch config info is contained in this doc between this section referenced and the info in the "Profile" section.
  4. Creating Network Segmentation Profile on the vSZ Controller
  5. Configuring a Network Segmentation Group in the Cloudpath UI