Disabling Syslog Messages for DAI

You can disable syslog messages for Dynamic ARP Inspection (DAI). Syslog messages are enabled by default on RUCKUS ICX devices.

Complete the following steps to disable DAI messages.

Enter the following command to disable syslog messages.
```
device(config)# ip arp inspection syslog disable
```
If you want to re-enable DAI syslog messages, use the no form of the command.

The following example disables DAI syslog messages.

device# configure terminal
device(config)# ip arp inspection syslog disable

The following example re-enables the DAI syslog messages.

device# configure terminal
device(config)# no ip arp inspection syslog disable