Disabling or Re-Enabling DHCP Option 82 (dhcp-relay information) Processing on an Interface

The dhcp-relay information enable command is supported only on ICX 8200 devices.

To disable DHCP option 82, enter global configuration mode by using the configure terminal command.
```
device# configure terminal
```

Enter interface configuration mode.

device(config)# interface ethernet 1/1/4

Disable DHCP option 82 on the specified interface.
```
device(config-if-e1000-1/1/4)# no dhcp-relay information
```

Re-enable DHCP option 82 as required at the interface configuration level.
```
device(config-if-e1000-1/1/4)# dhcp-relay information enable
```

The following example disables DHCP option 82 at the interface configuration level.

device# configure terminal
device(config)# interface ethernet 1/1/4
device(config-if-e1000-1/1/4)# no dhcp-relay information enable

The following example re-enables DHCP option 82 at the interface configuration level.

device# configure terminal
device(config)# interface ethernet 1/1/4
device(config-if-e1000-1/1/4)# dhcp-relay information enable