Displaying MSDP Information

You can use various show commands to view information about Multicast Source Discovery Protocol (MSDP).
Use one of the following commands to view MSDP information. The commands do not need to be entered in the specified order. Using these commands is optional and they can be entered in any order. For more information on the full list of show ip msdp commands, refer to the RUCKUS FastIron Command Reference.
  1. Enter the show ip msdp command to display MSDP peer information. 
    device> show ip msdp peer 

        IP Address           State       Mesh-group-name                
1       77.1.1.2             ESTABLISH                                  
        Keep Alive Time  Hold Time   Age          
        60               75          53           
                             Message Sent         Message Received 
        Keep Alive           1240                 1239                         
        Notifications        0                    0                            
        Source-Active        0                    0                            
        Lack of Resource     0                   
        Last Connection Reset Reason:Reason Unknown
        Notification Message Error Code Received:Unspecified
        Notification Message Error SubCode Received:Not Applicable
        Notification Message Error Code Transmitted:Unspecified
        Notification Message Error SubCode Transmitted:Not Applicable
        Local IP Address:  55.1.1.2
        TCP Connection state: ESTABLISHED
          Local host:  55.1.1.2, Local  Port: 8730
          Remote host: 77.1.1.2, Remote Port: 639
          ISentSeq: 1207132337  SendNext: 1207132386  TotUnAck:          0
          SendWnd:       16381  TotSent:          49  ReTrans:           0
          IRcvSeq:     4000739  RcvNext:     4000788  RcvWnd:        16384
          TotalRcv:         49  RcvQue:            0  SendQue:           0
        Input SA Filter:Not Applicable
        Input (S,G) route-map:None                                
        Input RP route-map:None
        Output SA Filter:Not Applicable
        Output (S,G) route-map:None
        Output RP route-map:None
  2. Enter the show ip msdp rpf-peer command, and enter an IP address, to display MSDP peer information for a reverse-path forwarding (RPF) peer. 
    device> show ip msdp rpf-peer 10.1.1.1

MSDP Peer Status Summary
KA: Keepalive SA:Source-Active NOT: Notification
Peer Address Peer As State KA SA NOT Age
In Out In Out In Out
40.40.40.3 1001 ESTABLISH 62 62 0 0 0 0 7
  3. Enter the show ip msdp command, specifying a VRF, to display information for the source actives in the MSDP cache for a non-default VRF instance. 
    device> show ip msdp vrf my_vrf sa-cache

Total of 10 SA cache entries
Index RP address (Source, Group) Orig Peer Age
1 2.2.2.2 (192.6.1.10, 227.1.1.1) 192.1.1.2 0
2 2.2.2.2 (192.6.1.10, 227.1.1.2) 192.1.1.2 0
3 2.2.2.2 (192.6.1.10, 227.1.1.3) 192.1.1.2 0
4 2.2.2.2 (192.6.1.10, 227.1.1.4) 192.1.1.2 0
5 2.2.2.2 (192.6.1.10, 227.1.1.5) 192.1.1.2 0
6 2.2.2.2 (192.6.1.10, 227.1.1.6) 192.1.1.2 0
7 2.2.2.2 (192.6.1.10, 227.1.1.7) 192.1.1.2 0
8 2.2.2.2 (192.6.1.10, 227.1.1.8) 192.1.1.2 0
9 2.2.2.2 (192.6.1.10, 227.1.1.9) 192.1.1.2 0
10 2.2.2.2 (192.6.1.10, 227.1.1.10) 192.1.1.2 0
Parent topic: Configuring Multicast Source Discovery Protocol