Automated Frequency Coordination (AFC) is a
technology that enables Wi-Fi to operate in the same frequency spectrum as licensed
users (specifically, radio devices operating in the 5.925–6.425 GHz: U-NII-5 and
6.525–6.875 GHz: U-NII-7 frequency spans). AFC helps manage and allocate frequencies
dynamically, allowing Wi-Fi to operate in the 6 GHz band while practically eliminating
interference to licensed users.
Following are some of the advantages AFC
deployment:
- AFC deployment enables increased
range and performance for indoor APs by allowing the APs to operate in the 6 GHz
band up to the same power limits that APs are allowed to use in non-DFS 5 GHz
channels
- AFC deployment enables outdoor
APs to operate in the 6 GHz U-NII-5 & U-NNI-7 bands in the USA. However,
regulatory bodies in other countries have not yet allowed the use of 6 GHz for
Wi-Fi. As a result, the aforementioned statement is likely to change as adoption
of 6 GHz grows.
- AFC enhances spectrum efficiency
by enabling devices to utilize available frequencies more effectively, leading
to optimized network performance.
AFC Terminology
| Terms |
Description |
| Fixed Client Device |
A client device used as customer premises equipment that is
permanently attached to a structure, operates only on channels
provided by AFC, has a geolocation capability, and complies with
antenna pointing angle requirements. |
| IEEE 802.11mc |
IEEE 802.11mc was the third mandatory coordination (MC)
maintenance/revision group for IEEE Standard 802.11-2016, which
governs WLAN standards. With regards to AFC, one of the new features
introduced was the 802.11mc protocol standard known as Wi-Fi Round
Trip Time (RTT). Wi-Fi RTT defines the methodology for Wi-Fi APs to
measure the distance to nearby Wi-Fi APs to determine their location
within one-to-two meter accuracy. Across the Wi-Fi industry, the
standardized Wi-Fi RTT methodology has become synonymous with IEEE
802.11mc. |
| Low Power Indoor (LPI) mode |
Refers to the ability of an unlicensed device to operate across
the entire 1200 MHz of the 6 GHz spectrum (U-NII-5 through
U-NII-8 frequency bands) without AFC oversight.
|
| Non-Reference AP |
Refers to an AP for which its geolocation coordinates are deduced
from the relative distance to another Non-Reference AP and to the
Reference APs. |
| Power Spectral Density (PSD) |
The total energy output per unit bandwidth from a radio
transmission for which the transmit power is at maximum level,
divided by the total duration of the radio transmission. |
| Reference AP |
Refers to an AP, within a specific Geolocation Group, that has a
pre-existing Location Specification in the Geolocator's
database. |
| Standard Power (SP) mode |
Standard Power mode refers to the ability of an unlicensed device
to operate at a much higher power, indoors or outdoors, in the
U-NII-5 and U-NII-7 frequency bands. Standard mode requires AFC
oversight. |