Removing Stacking Ports from an ICX 7750

Use the no stack-port or the no stack-trunk command to remove stacking ports from a unit.

The following example removes stack-port 3/2/1, which has no neighbor.

ICX7750-48F Router# show stack
T=4h19m31.8: alone: standalone, D: dynamic cfg, S: static
ID   Type          Role    Mac Address    Pri State   Comment
1  S ICX7750-48XGF active  609c.9f7f.9400 128 local   Ready
2  S ICX7750-20QXG standby cc4e.2438.7280   0 remote  Ready
3  S ICX7750-20QXG member  748e.f8f9.6300   0 remote  Ready

    standby      active
     +---+        +---+        +---+
     | 2 |2/1==2/1| 1 |2/4==2/4| 3 |2/1
     +---+        +---+        +---+

ICX7750-48F Router# configure terminal
ICX7750-48F Router(config)# stack unit 3
ICX7750-48F Router(config-unit-3)# no stack-port 3/2/1
stack-port 3/2/1 is removed