Converting an ICX 7750 Trunk to a Port Connection in a Live Stack

To remove a trunk and create a port connection on a live stack, use the multi-stack-port command.

Note: Only primary ports (stack module ports 1 and 4) can be designated in the multi-stack-port command.

The following code excerpt displays configuration information for stack units 6 and 7. 

stack unit 6
  module 1 icx7750-20-qxg-port-management-module
  module 2 icx7750-qsfp-6port-qsfp-240g-module
  stack-trunk 6/2/1 to 6/2/3
  stack-port 6/2/4
stack unit 7
  module 1 icx7750-20-qxg-port-management-module
  module 2 icx7750-qsfp-6port-qsfp-240g-module
  stack-port 7/2/1
  stack-trunk 7/2/4 to 7/2/6

In the following example, the stacking trunk between units 6 and 7 is changed to a stacking port on each end. 

ICX7750-48F Router# configure terminal
ICX7750-48F Router(config)# stack unit 6
ICX7750-48F Router(config-unit-6)# multi-stack-port 6/2/1 and 7/2/4

Note: The no form of the multi-stack-port command removes port configuration on the designated ports.

Parent topic: ICX 7750 Stack Configuration Overview