Manually Configuring the SmartZone IP Address on an ICX Switch

Complete the following steps to configure a list of SmartZone IP addresses on the ICX device.
  1. Enter the manager active-list command followed by one or more priority IP addresses for the SmartZone device, as shown in the following example.
    The IP addresses listed are examples only. 
    ICX# configure terminal
ICX(config)# manager active-list 192.168.11.200 192.168.11.201 192.168.11.202
  2. Use the sz passive-list ip-address command to configure the SmartZone IP addresses to be used for redundancy. 
    ICX(config)# sz passive-list 10.176.160.118
Parent topic: Connecting the ICX to the SmartZone Controller