Configuring the ICX Source Address to Be Used by SmartZone

By default, the IP address of the management port is included in the manager query as the ICX source address for an ICX-Management connection. Use the management source-interface protocol manager command to specify a different ICX source address.

The management source-interface protocol manager command can specify an Ethernet, LAG, loopback, or virtual Ethernet (VE) interface. The IP address with the lowest number for the specified interface is used for the connection.

The following example configures an Ethernet port as the ICX source address for an ICX-Management connection.

ICX# configure terminal
ICX(config)# management source-interface ethernet 1/1/3 protocol manager 

Refer to the RUCKUS FastIron Command Reference for more information.