mvno

Creates or updates the Mobile Virtual Network Operator (MVNO) configuration.
Syntax
mvno name
no admin-radius capabilities zone

After the mvno command is entered the following configuration syntax is available:

[ admin | admin-radius name | capabilities { administration | configuration | device | identity | monitor | reports | capabilities-depth-1 } | description text | zone name ]

After the mvno-admin command is entered to enable the Admin configuration mode, the following configuration syntax is available:

[ email email-address | name name | password | phone number | real-name name | title job-title ]

After the mvno-admin-radius command is entered, the following configuration syntax is available:

[ ip ip-address | port port-number| shared-secret password | | type{ radius | tacacs}]
Command Default

MVNO interface is enabled on specifying the MVNO interface name.

Parameters
admin name
Specifies an administrator account.
admin-radius name
Specifies the RADIUS server for administrators.
capabilities { administration | configuration | device | identity | monitor | reports | capabilities-depth-1 }
Creates or updates the custom connection capabilities.
description text
Sets the description of the L2oGRE profile for the user.
zone text
Move the access point to another zone.
email email-address
Sets the email address for the user.
name name
Sets the administrator account name or the RADIUS server name.
password password
Sets the password for the account
phone number
Sets the phone number of the user.
real-name name
Sets the real name of the user.
title job-title
Sets the job title of the user.
ip-addressip-address
Sets the IP address for the primary RADIUS server.
portnumber
Sets the port number for the primary RADIUS server.
shared-secret password
Sets the shared secret for the primary RADIUS server. Valid values range from 1 through 255 characters.
type
Sets the authentication type.
radius
Specifies RADIUS authentication.
tacacs
Specifies TACACS authentication.
Modes

Global configuration mode

Usage Guidelines

A Mobile Virtual Network Operator (MVNO) uses a host carrier network to service its mobile users. An MVNO account is created for each operator and the MVNO page lists the accounts that are created. This command is supported only on vSZ-H platform.

  • capabilities administration sets the
    need content
    xxx.
  • capabilities configuration sets the xxx.
    need content.
  • capabilities device sets the xxx
    need content.
  • capabilities identity sets the xxx.
    need content.
  • capabilities monitor sets the xxx.
    need content.
  • capabilities reports sets the xxx.
    need content.
  • capabilities capabilities-depth-1 sets the xxx.
    need content.

Examples

The following example sets the RADIUS server for an MVNO account. 

device# config
device(config)# mgmt-acl 
device(config-mvno)# admin-radius radius
device(config-mvno-admin-radius)# 
<cr>
Parent topic: Commands J through N