force-fragmentation

Breaks a packet into smaller fragments to ensure it can be transmitted over a path with a smaller Maximum Transmission Unit (MTU).
Syntax
force-fragmentation {rks-gre | RGRE_profile name}
no force-fragmentation
Command Default

The system is in the default state, GRE tunnel fragmentation is not forced.

Parameters
rks-gre
Allows configuration of RUCKUS Generic Routing Encapsulation (rks-gre) tunnel settings.
RGRE_profile name
Enables RGRE_xx (profile name) for force fragmentation.
Modes

RGRE Global configuration mode

Usage Guidelines

Use the no form of the command to disable the force fragmentation.

This command is supported on all SmartZone platforms except SmartZone Data Plane controller.

Examples

The following example displays the force-fragmentation command on RGRE_Only profile name:

device# config

device(config)# rks-gre RGRE_Only

device(config-rks-gre)# force-fragmentation

device(config-rks-gre)# show running-config rks-gre RGRE_Only
   Name                : RGRE_Only
   Description         :
   Ruckus Tunnel Mode  : GRE
   Tunnel Encryption   : Disabled
   WLAN Interface MTU  : Auto
   Force Fragmentation : Enabled

The following example displays the no force-fragmentation command on RGRE_Only profile name:

device(config-rks-gre)# no force-fragmentation
Do you want to continue to disable (or input 'no' to cancel)? [yes/no] yes
Successful operation
History
Release version Command history
7.1.1 This command was introduced.
Parent topic: Commands D through F