Enabling the SSL Server on the Device
HTTPS is enabled by default. If necessary, you can disable it. If HTTPS has been disabled, you can re-enable it. HTTP, likewise, can be disabled and re-enabled.
The following commands disable HTTPS.
device# configure terminal device(config)# no web-management https
To re-enable the SSL server to use HTTPS on the RUCKUS ICX device, enter the following command.
device(config)# web-management https
Use the http
parameter with the web-management or no
web-management command to enable or disable HTTP servers.
To disable both HTTP and HTTPs servers, enter the following command.
device# configure terminal device(config)# no web-management