Displaying MACsec Configuration Details

You can display configuration information for all MACsec groups on a device, or you can display details for a particular group.
  1. In privileged EXEC, global configuration, or dot1x-mka interface mode, use the show dot1x-mka config command to display MACsec configuration details for the device.

    In the following example, MACsec parameters are displayed for the device and all groups configured on it. Specific MACsec interfaces are displayed as well as the pre-shared key for each interface.

    Note: The pre-shared key is displayed as an encrypted value, not in plain text.

    
device(config)# show dot1x-mka config
dot1x-mka-enable
mka-cfg-group group1
  key-server-priority 20
  macsec frame-validation check
  macsec confidentiality-offset 30
  macsec cipher-suite gcm-aes-128
  macsec-replay protection out-of-order window-size 100
  enable-mka ethernet 1/3/2
mka-cfg-group group1
  pre-shared-key xxxxxxxxxxxxxxxxxxxxxxxx key-name 96437a93ccf10d9dfe3478460cce5132
enable-mka ethernet 1/3/6
  mka-cfg-group group1
  pre-shared-key xxxxxxxxxxxxxxxxxxxxxxxx key-name 96437a93ccf10d9dfe3478460cce51321
  2. In privileged EXEC, global configuration, or dot1x-mka interface mode, enter the show dot1x-mka config-group command to display information for all configured groups. Add a group name to the command to narrow the information displayed to one group.

    The following example displays information for MKA group test1. 

    device(config)# show dot1x-mka config-group test1
 mka-cfg-group test1
  key-server-priority 5
  macsec cipher-suite gcm-aes-128 integrity-only
  macsec confidentiality-offset 30
  macsec frame-validation strict
  macsec replay-protection strict
    Note: Group information does not include the pre-shared key or enabled connections. Use the show dot1x-mka config command to obtain that information.
  3. In privileged EXEC, global configuration, or dot1x-mka interface mode, use the show keychain mka command to display details for configured MACsec keychains. For additional details on a specific keychain, use the show keychain name command.

    The following example shows that one MKA keychain named "sample" has been configured.

    device# show keychain mka

Keychain  : sample
Tolerance : 0
----------------------------------------------------------------------------
  Key-id  |    Algo    | SendActive | SendTimer | AcceptActive | AcceptTimer 
----------------------------------------------------------------------------
 100       aes-128-cmac Yes(GMT+00)      -        No(GMT+00)          -

    The following example uses the show keychain name command followed by the keychain name displayed in the previous example to display additional details for the specified keychain.

    device# show keychain name sample
Keychain: sample 
  Tolerance: 0
  Key-id   : 100
      AuthAlgorithm: aes-128-cmac
      Key-String   : *******
      Send Lifetime:-
          Start    : 02-16-2022 04:05:00 End         : Infinite
          Active   : Yes                 TimeToExpire: Infinite
          Timezone : GMT+00
Parent topic: Displaying MACsec Information