Displaying the Configured Connections to Controllers
Use the
show openflow command to display the OpenFlow configuration, including the configured connections
to controllers on the device. The output includes the configured unprotected VLANs
as well.
device(config)# show openflow Administrative Status: Enabled SSL Status: Enabled Controller Type: OFV 100 Number of Controllers: 1 Controller 1: Connection Mode: passive, TCP, Listening Address: 0.0.0.0 Connection Port: 6633 Connection Status: TCP_LISTENING Match Capability: L2 : Port, Source MAC, Destination MAC, Ether type, Vlan, Vlan PCP L3 : Port, Vlan, Vlan PCP, Ethertype(IP,ARP,LLDP), Source IP, Destination IP, IP Protocol, IP TOS, IP Src Port, IP Dst Port L23: All Normal Openflow Enabled Ports: Openflow Hybrid Interfaces: e1/1/1 Protected VLANs : None Unprotected VLANs : 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 ...................................................... ...................................................... 3994, 3995, 3996, 3997, 3998, 3999, 4000, 4001, 4011, e1/2/1 Protected VLANs : None Unprotected VLANs : 4010, Default action: drop Maximum number of flows allowed: 65536 Active flow: 0 Maximum number of Protected Vlans allowed: 2048 Maximum number of Unprotected Vlans allowed: 4096 Total number of Unprotected Vlans: 4002
Output Fields for the Show Openflow Command
Field |
Description |
|---|---|
Administrative Status |
Indicates the administrative status of OpenFlow on the device. |
|
SSL Status |
Indicates the SSL status of OpenFlow on the device. |
Controller Type |
Indicates the OpenFlow protocol version that is supported on the device. |
Number of Controllers |
Lists the number of controller connections configured on the device. Up to three concurrent controller connections are supported. |
Connection Mode |
Indicates the mode of the controller connection configured. You can configure active or passive connection to controllers. An active connection is initiated by the device. In a passive connection, the device is in the listening mode, and accepts requests from controllers. If the optional controller address is not specified, any controller can establish a connection with the device in the passive mode. Refer to Connecting to an OpenFlow Controller. |
Listening Address |
Indicates the address of the specified controller. |
Connection Port |
Indicates the TCP port that is used for connection to the controller. By default, port 6633 is used. |
|
Connection Status |
Indicates the controller connection port status. |
Match Capability |
Specifies the matching rules supported. |
Normal OpenFlow Enabled Ports |
Lists the ports on the device that are enabled for OpenFlow. |
OpenFlow Hybrid Interfaces |
Indicates the VLAN IDs. |
Default action |
Indicates the default action for packets that do not match any configured flows.
By default, such packets are dropped. However, you can configure these packets to
be sent to the controller by using the
|
Maximum number of flows allowed |
Indicates the maximum number of flows allowed on the device that is configured by
using the
|