Configuring OpenFlow Hybrid Port Mode for Devices

  1. Enable OpenFlow at the global configuration level. Refer to Enabling OpenFlow on Devices.
  2. Configure the OpenFlow Controller. Refer to Connecting to an OpenFlow Controller.
  3. Configure the protected VLANs on the port. Refer to Adding or Deleting Protected VLANs.
  4. Enable OpenFlow hybrid port mode on the desired interfaces. Refer to Enabling OpenFlow Hybrid Port Mode.
  5. Configure a VE interface for the interface by specifying the protected or unprotected VLANs, and add routing entries. 
    device(config-if-e10000-1/1/1)# openflow protected-vlans 300
    device(config-if-e10000-1/1/1)# vlan 300
Parent topic: OpenFlow Hybrid Port Mode