Adding or Deleting Protected VLANs

Use the openflow protected-vlans command to add protected VLANs on an OpenFlow hybrid port mode interface. The no form of the command deletes the configured protected VLANs from the OpenFlow hybrid-enabled port. A maximum of 40 protected VLANs can be configured on an OpenFlow port.

device(config-if-e10000-1/2/5)# openflow protected-vlans 10

VLANs must be configured individually.

Note: You cannot specify a VLAN range using the openflow protected-vlans command.
Parent topic: OpenFlow Hybrid Port Mode