Enabling the IGMP Version for a Specific Interface

The IGMP version can be configured on RUCKUS devices for a specific interface.

When the IGMP version is configured for a specific interface, the setting overrides the globally-configured version. The following task steps show how to configure the IGMP version on either a physical interface or a virtual interface.

  1. Enter global configuration mode. 
    device# configure terminal
  2. Configure a physical or virtual interface.
    • Configure a physical interface. 
      device(config)# interface ethernet 1/1/5
    • Configure a virtual interface. 
      device(config)# interface ve 3
    This example enables IGMP version 3. If you do not specify an IGMP version, the default version is IGMPv2.
  3. Enable the IGMP version.
    • Enable IGMPv3 for a physical port, Ethernet interface 1/1/5 
      device(config-if-1/1/5)# ip igmp version 3
    • Enable IGMPv3 for a physical port on a virtual interface. 
      device(config-vif-3)# ip igmp version 3

The following example enables IGMPv3 on a specific physical interface. 

device# configure terminal
device(config)# interface ethernet 1/1/5
device(config-if-1/1/5)# ip igmp version 3

The following example enables IGMPv3 on a specific virtual interface. 

device# configure terminal
device(config)# interface ve 3
device(config-vif-3)# ip igmp version 3
Parent topic: IGMPv3