Displaying MSDP Information

You can use various show commands to view information about Multicast Source Discovery Protocol (MSDP).
Use one of the following commands to view MSDP information. The commands do not need to be entered in the specified order. Using these commands is optional and they can be entered in any order. For more information on the full list of show ip msdp commands, refer to the RUCKUS FastIron Command Reference.
  1. Enter the show ip msdp command to display MSDP peer information including TCP keychain (AO) options.. 
    device# show ip msdp  peer 
        IP Address           State       Mesh-group-name                
1       10.10.10.1           ESTABLISH                                  
        Keep Alive Time  Hold Time   Age          
        60               75          9            
                             Message Sent         Message Received 
        Keep Alive           18639                18634                        
        Notifications        0                    0                            
        Source-Active        0                    0                            
        Lack of Resource     0                   
        Last Connection Reset Reason:Reason Unknown
        Notification Message Error Code Received:Unspecified
        Notification Message Error SubCode Received:Not Applicable
        Notification Message Error Code Transmitted:Unspecified
        Notification Message Error SubCode Transmitted:Not Applicable
        Local IP Address:  10.10.10.2
        AO Keychain name:  chain4new
        TCP Connection state: ESTABLISHED

     TCP Keychain name      : chain4new
     TCP-AO Enabled         : YES
     TCP-AO in use          : YES
     Keychain valid         : YES
     No of segments dropped : 0
     Send-Active-Key
     ---------------
       Key-id               : 1                                   
       Crypto Algorithm     : HMAC-SHA1
       Send-id              : 255
       Recv-id              : 255
       Include-tcp-options  : YES
       Accept-ao-mismatch   : YES
     Recv-Active-Key
     ---------------
       Key-id               : 1
       Crypto Algorithm     : HMAC-SHA1
       Send-id              : 255
       Recv-id              : 255
       Include-tcp-options  : YES
       Accept-ao-mismatch   : YES
          Local host:  10.10.10.2, Local  Port: 639
          Remote host: 10.10.10.1, Remote Port: 8746
          ISentSeq: 4196729273  SendNext: 4196785191  TotUnAck:          0
          SendWnd:       16384  TotSent:       55918  ReTrans:         264
          IRcvSeq:  1236641563  RcvNext:  1236697466  RcvWnd:        16384
          TotalRcv:      55903  RcvQue:            0  SendQue:           0
        Input SA Filter:Not Applicable
        Input (S,G) route-map:None
        Input RP route-map:None
        Output SA Filter:Not Applicable
        Output (S,G) route-map:None
        Output RP route-map:None                                  
       SA message Drops:
                Bad_length        : 0
                Invalid_VrfIdx    : 0
                Rpf_Failure_Drop  : 0
                Wrong_group_Drop  : 0
                Inbound_sg_Drop   : 0
                Inbound_rp_Drop   : 0
                Outbound_sg_Drop  : 0
                Outbound_rp_Drop  : 0
  2. Enter the show ip msdp rpf-peer command, and enter an IP address, to display MSDP peer information for a reverse-path forwarding (RPF) peer. 
    device> show ip msdp rpf-peer 10.1.1.1

MSDP Peer Status Summary
KA: Keepalive SA:Source-Active NOT: Notification
Peer Address Peer As State KA SA NOT Age
In Out In Out In Out
40.40.40.3 1001 ESTABLISH 62 62 0 0 0 0 7
  3. Enter the show ip msdp command, specifying a VRF, to display information for the source actives in the MSDP cache for a non-default VRF instance. 
    device> show ip msdp vrf my_vrf sa-cache

Total of 10 SA cache entries
Index RP address (Source, Group) Orig Peer Age
1 2.2.2.2 (192.6.1.10, 227.1.1.1) 192.1.1.2 0
2 2.2.2.2 (192.6.1.10, 227.1.1.2) 192.1.1.2 0
3 2.2.2.2 (192.6.1.10, 227.1.1.3) 192.1.1.2 0
4 2.2.2.2 (192.6.1.10, 227.1.1.4) 192.1.1.2 0
5 2.2.2.2 (192.6.1.10, 227.1.1.5) 192.1.1.2 0
6 2.2.2.2 (192.6.1.10, 227.1.1.6) 192.1.1.2 0
7 2.2.2.2 (192.6.1.10, 227.1.1.7) 192.1.1.2 0
8 2.2.2.2 (192.6.1.10, 227.1.1.8) 192.1.1.2 0
9 2.2.2.2 (192.6.1.10, 227.1.1.9) 192.1.1.2 0
10 2.2.2.2 (192.6.1.10, 227.1.1.10) 192.1.1.2 0
Parent topic: Configuring Multicast Source Discovery Protocol