Configuration Fundamentals
| Feature | ICX 7150 | ICX 7250 | ICX 7450 | ICX 7550 | ICX 7650 | ICX 7850 |
|---|---|---|---|---|---|---|
| Terminal logging | 08.0.70 | 08.0.70 | 08.0.70 | 08.0.95 | 08.0.70 | 08.0.90 |
| Reset button to factory default settings | 08.0.70 | No | No | 08.0.95 | 08.0.70 | 08.0.90 |
| 10G LRM adapter | 08.0.61 | 08.0.61 | No | No | No | No |
| System name, contact, and location | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| Cancelling an outbound Telnet session | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| Byte-based broadcast, multicast, and unknown-unicast limits | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| Packet-based broadcast, multicast, and unknown-unicast limits | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| CLI banners | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| Port name | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| 10 Mbps port speed | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | No |
| 100 Mbps port speed | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | No |
| 1000 Mbps port speed | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| 2.5 Gbps port speed | 08.0.611 | No | No | 08.0.952 | 08.0.703 | No |
| 5 Gbps port speed | 8.0.914 | No | No | 08.0.952 | 08.0.703 | No |
| 10 Gbps port speed | 8.0.914 | No | No | 08.0.952 | 08.0.703 | No |
| 25 Gbps port speed | No | No | No | No | No | 08.0.905 |
| 40 Gbps port speed | No | No | 8.0.20 | 8.0.95 | 8.0.70 | 8.0.10 |
| 100 Gbps port speed | No | No | No | 08.0.95 | 08.0.70 | 08.0.90 |
| Auto-negotiation | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| Auto-negotiation maximum port speed advertisement | 08.0.606 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| Full-duplex mode | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| Auto MDI/MDIX detection | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| Port status (enable or disable) | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| Support for 100BaseTX | No | 08.0.30 | 08.0.20 | No | No | 08.0.90 |
| Support for 100BaseFX | 09.0.10a | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| Gbps fiber negotiate mode | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| VoIP auto-configuration and CDP | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| Broadcast, multicast, and unknown-unicast suppression port dampening | 08.0.60 | 08.0.30h | 08.0.30h | 08.0.95 | 08.0.70 | 08.0.90 |
| Port flap dampening | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| Shutdown prevention for loop-detect | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| Elapsed timestamp for port statistics reset | 08.0.60 | 08.0.30 | 08.0.30 | 08.0.95 | 08.0.70 | 08.0.90 |
| Traffic counters for outbound traffic | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| Egress queue counters | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| Flash and boot code verification | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| Flash image verification | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| Changing flash timeout value | 08.0.60 | 08.0.30 | 08.0.30 | 08.0.95 | 08.0.70 | 08.0.90 |
| Software reboot | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| Show boot preference | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| Loading and saving configuration files | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| System reload scheduling | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| Management port | 08.0.607 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| Telnet | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| TFTP | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| TFTP blocksize | 09.0.10a | 09.0.10a | 09.0.10a | 09.0.10a | 09.0.10a | 09.0.10a |
| Multi-port static MAC address | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| Static MAC entries with option to set traffic priority | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| MAC address learning | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| MAC address filtering on source and destination MAC addresses | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| MAC address move notification | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| Ability to disable MAC learning | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| Layer 2 jumbo frames | 08.0.60 | 08.0.30 | 08.0.20 | 08.0.95 | 08.0.70 | 08.0.90 |
| Ethernet loopback | 08.0.60 | 08.0.308 | 08.0.308 | 08.0.95 | 08.0.70 | 08.0.90 |
| Macros (batch and execute) | 08.0.60 | 08.0.40 | 08.0.40 | 08.0.95 | 08.0.70 | 08.0.90 |
| CLI history | 08.0.60 | 08.0.40 | 08.0.40 | 08.0.95 | 08.0.70 | 08.0.90 |
| Fanless mode | 08.0.609 | No | No | No | No | No |
| Status button support | 08.0.70 | No | No | 08.0.95 | 08.0.70 | 08.0.90 |
| LEDs On/Off command | 08.0.92 | 08.0.92 | 08.0.92 | 08.0.95 | 08.0.92 | 08.0.92 |
| IEEE 802.3bz | No | No | No | 08.0.95 | 08.0.7010 | No |
| Default username and password
Note: Applicable to new
ICX switches that are initially deployed using the 08.0.90
release.
|
08.0.90 | 08.0.90 | 08.0.90 | 08.0.95 | 08.0.90 | 08.0.90 |
| Forwarding profiles | No | No | No | 08.0.95 | No | 08.0.90 |
| Automation with Ansible | 08.0.91 | 08.0.91 | 08.0.91 | 08.0.95 | 08.0.91 | 08.0.91 |
| Ruckus SmartZone management of ICX
7xxx switches (monitoring, customized thresholds, remote ping,
traceroute)
|
8.0.80 | 8.0.80 | 8.0.80 | 08.0.95 | 8.0.80 | 08.0.90 |
| Ruckus SmartZone management of ICX 7xxx switches (ICX configuration from SmartZone) | 08.0.90 | 08.0.90 | 08.0.90 | 08.0.95 | 08.0.90 | 08.0.90 |
| FQDN Support for Switch Registrar | 08.0.92 | 08.0.92 | 08.0.92 | 08.0.95 | 08.0.92 | 08.0.92 |
| ICX Source IP for SmartZone Communication | 08.0.92 | 08.0.92 | 08.0.92 | 08.0.95 | 08.0.92 | 08.0.92 |
| ICX Management in Ruckus Cloud | 08.0.92b11 | No | No | 08.0.95 | 08.0.92b11 | 08.0.92b11 |
|
This
feature added for 09.0.10e. Verify this information is correct.
ICX Management in the RUCKUS Cloud via HTTPs12 |
09.0.10e13 | No | No | 09.0.10e13 | 09.0.10e13 | 09.0.10e13 |
| IPv6 Support for SmartZone (static configuration only) | 09.0.10a | 09.0.10a | 09.0.10a | 09.0.10a | 09.0.10a | 09.0.10a |
| RESTCONF | 09.0.10a | 09.0.10a | 09.0.10a | 09.0.10a | 09.0.10a | 09.0.10a |
| New web user interface (UI) | 09.0.10a | 09.0.10a | 09.0.10a | 09.0.10a | 09.0.10a | 09.0.10a |
| Breakout support | No | No | No | 09.0.10a | No | 08.0.90 |
- Supported only on ICX 7150-48ZP. Support for all ICX 7150 devices began in 09.0.10a. ↩
- Supported only on ICX 7550-24ZP, ICX 7550-48ZP. Support for all ICX 7150 devices began in 09.0.10a. ↩
- Supported only on ICX 7650-48ZP. Support for all ICX 7150 devices began in 09.0.10a. ↩
- Supported ony on ICX 7150-C10ZP. Support for all ICX 7150 devices began in 09.0.10a. ↩
- Supported only on ICX 7850-48F ↩
- Only for copper ports. Fiber ports are not supported. ↩
- The ICX 7150-C08P does not support an out-of-the-box management port. ↩
- No support for flow-unaware mode. ↩
- Supported only on the ICX 7150-24P and the ICX 7150-48P. ↩
- Supported on the ICX 7650-48ZP only ↩
- ICX switches running 08.0.90d and above can be discovered by Ruckus Cloud. Ruckus Cloud automatically upgrades these switches to the required version during onboarding. ↩
- As part of release migration in RUCKUS Cloud, switches will be automatically upgraded from FastIron Release 08.0.95ca and later to FastIron Release 09.0.10e. Users will be notified before the upgrade is scheduled. ↩
- As an exception FastIron Release 10.0.00 and subsequent patches do not support this feature. However, FastIron Release 10.0.10 and later will support this feature. ↩