Displaying sFlow Information
To display sFlow configuration information and statistics, enter the following command from any mode of the CLI.
device# show sflow sFlow version:5 sFlow services are enabled. sFlow agent IP address: 10.123.123.1 sFlow source IP address: 5.5.5.5 sFlow source IPv6 address: 4545::2 4 collector destinations configured: Collector IP 192.168.4.204, UDP 6343 Collector IP 192.168.4.200, UDP 6333 Collector IP 192.168.4.202, UDP 6355 Collector IP 192.168.4.203, UDP 6565 Configured UDP source port: 33333 Polling interval is 0 seconds. Configured default sampling rate: 1 per 512 packets Actual default sampling rate: 1 per 512 packets Sample mode: Non-dropped packets The maximum sFlow sample size:512 exporting cpu-traffic is enabled exporting cpu-traffic sample rate:16 exporting system-info is enabled exporting system-info polling interval:20 seconds 10552 UDP packets exported 24127 sFlow samples collected. sFlow ports: ethe 1/1/2 to 1/1/12 ethe 1/1/15 ethe 1/1/25 to 1/1/26 ethe 1/4/1 ethe 1/5/10 to 1/5/20 ethe 1/8/1 ethe 1/8/4 Module Sampling Rates --------------------- Slot 1 configured rate=512, actual rate=512 Slot 3 configured rate=0, actual rate=0 Slot 4 configured rate=10000, actual rate=32768 Slot 5 configured rate=512, actual rate=512 Slot 7 configured rate=0, actual rate=0 Slot 8 configured rate=512, actual rate=512 Port Sampling Rates ------------------- Port 1/8/4, configured rate=512, actual rate=512, Subsampling factor=1 Port 1/8/1, configured rate=512, actual rate=512, Subsampling factor=1 Port 1/5/20, configured rate=3000, actual rate=8192, Subsampling factor=16 Port 1/5/19, configured rate=512, actual rate=512, Subsampling factor=1 Port 1/5/18, configured rate=512, actual rate=512, Subsampling factor=1 Port 1/5/17, configured rate=1500, actual rate=2048, Subsampling factor=4 ...Output truncated...