Find Technical Content
  • Home
  • Ruckus Support Portal
  • Ruckus Networks
  • Table of Contents
  • Dark Mode

Powered by Titania Delivery

⚠ This cached page may be outdated. Click refresh to get the latest content.
Cached Version You are Offline

You are viewing a cached version of this page.

You are currently offline. This page was loaded from cache.

Map

  • 1 Mounting the Device
    • 1.1 Mounting Options
    • 1.2 Precautions Specific to Mounting
    • 1.3 Removing Port Covers
    • 1.4 Mounting on a Desktop or Flat Surface
    • 1.5 Two-Post Rack Mount Installation (ICX7000-RMK)
    • 1.6 Two-Post Rack Mount Installation (ICX-RMK-4POST-TL)
      • 1.6.1 Flush-Front Mounting
    • 1.7 Four-Post Rack Mount Installation (ICX-RMK-4POST-TL)
      • 1.7.1 Flush-Front Mounting
        • 1.7.1.1 Attaching the Front Brackets
        • 1.7.1.2 Installing the Device in the Rack
        • 1.7.1.3 Attaching the Rear Brackets to the Rack Posts
    • 1.8 Installing the 1U, 1.5U, and 2U Universal Kit for Four-Post Racks (XBR-R000295)
      • 1.8.1 Time and Items Required
      • 1.8.2 Parts List
      • 1.8.3 Flush-Front Mounting the Device in a Rack
        • 1.8.3.1 Attaching the Front Brackets
        • 1.8.3.2 Attaching the Bracket Extensions to the Device
        • 1.8.3.3 Installing the Device in the Rack
        • 1.8.3.4 Attaching the Rear Brackets to the Extensions
        • 1.8.3.5 Attaching the Rear Brackets to the Rack Posts
      • 1.8.4 Flush-Rear (Recessed) Mounting the Device in the Rack
        • 1.8.4.1 Front Brackets to the Rear of the Device
        • 1.8.4.2 Attaching the Bracket Extensions to the Front of the Device
        • 1.8.4.3 Installing the Device in the Rack
        • 1.8.4.4 Attaching the Rear Brackets to the Bracket Extensions at the Front of the Device
        • 1.8.4.5 Attaching the Rear Brackets to the Front Rack Posts

Time and Items Required

Allow 15 to 30 minutes to complete this procedure.

The following items are required to install the device using the 1U, 1.5U, and 2U Universal Kit for Four-Post Racks:

  • #2 Phillips torque screwdriver
  • 1/4-inch slotted-blade torque screwdriver
Parent topic: Installing the 1U, 1.5U, and 2U Universal Kit for Four-Post Racks (XBR-R000295)

Did you find what you were looking for?

Thanks!

Ruckus Wireless

© 2026 Ruckus Wireless LLC All rights reserved.

  • Accessibility
  • Privacy & Cookies
  • Do Not Sell My Information
  • Trademarks
  • Terms
  • Feedback