Attaching the Bracket Extensions to the Front of the Device
Complete the following steps to attach the bracket extensions to the front of the device.
- Position the right bracket extension along the side of the device as shown in Attaching the Bracket Extensions to the Device.
- Insert four 8-32 x 5/16-in. flathead screws through the vertically aligned holes in the bracket extension and then into the holes on the side of the device. Use the upper and lower screw holes, leaving the center holes empty.
- Repeat and to attach the left bracket extension to the left side of the device.
- Tighten all the 8-32 x 5/16-in. screws to a torque of 15 in-lb (17 cm-kg).
