Find Technical Content
  • Home
  • Ruckus Support Portal
  • Ruckus Networks
  • Table of Contents
  • Dark Mode

Powered by Titania Delivery

⚠ This cached page may be outdated. Click refresh to get the latest content.
Cached Version You are Offline

You are viewing a cached version of this page.

You are currently offline. This page was loaded from cache.

ICX 7250 Installation

  • 1 Installation
    • 1.1 Shipping carton contents
    • 1.2 Configuration requirements
    • 1.3 Summary of installation tasks
    • 1.4 Installation precautions
      • 1.4.1 General precautions
      • 1.4.2 Lifting precautions
      • 1.4.3 Power precautions
    • 1.5 Preparing the installation site
      • 1.5.1 Cabling infrastructure
      • 1.5.2 Installation location
      • 1.5.3 Rack mount installation considerations
    • 1.6 Installing the device
      • 1.6.1 Desktop installation
      • 1.6.2 Installing the device into a rack
        • 1.6.2.1 Installing the device using the included two-post rack mount kit
        • 1.6.2.2 Installing the 1U, 1.5U, and 2U Universal Kit for Four-Post Racks (XBR-R000295)
          • 1.6.2.2.2 Time and Items Required
          • 1.6.2.2.3 Parts List
          • 1.6.2.2.4 Flush-Front Mounting the Device in a Rack
            • 1.6.2.2.4.1 Attaching the Front Brackets
            • 1.6.2.2.4.2 Attaching the Bracket Extensions to the Device
            • 1.6.2.2.4.3 Installing the Device in the Rack
            • 1.6.2.2.4.4 Attaching the Rear Brackets to the Extensions
            • 1.6.2.2.4.5 Attaching the Rear Brackets to the Rack Posts
          • 1.6.2.2.5 Flush-Rear (Recessed) Mounting the Device in the Rack
            • 1.6.2.2.5.1 Front Brackets to the Rear of the Device
            • 1.6.2.2.5.2 Attaching the Bracket Extensions to the Front of the Device
            • 1.6.2.2.5.3 Installing the Device in the Rack
            • 1.6.2.2.5.4 Attaching the Rear Brackets to the Bracket Extensions at the Front of the Device
            • 1.6.2.2.5.5 Attaching the Rear Brackets to the Front Rack Posts
        • 1.6.2.3 Installing the Universal Four-Post Rack Kit (XBR-R000296)
          • 1.6.2.3.1 Installation requirements
          • 1.6.2.3.2 Time and items required
          • 1.6.2.3.3 Flush-front mounting
            • 1.6.2.3.3.1 Attaching the front brackets
            • 1.6.2.3.3.2 Attaching the extension brackets to the device
            • 1.6.2.3.3.3 Installing the device in the rack
            • 1.6.2.3.3.4 Attaching the rear brackets to the extensions
            • 1.6.2.3.3.5 Attaching the rear brackets to the rack posts
          • 1.6.2.3.4 Flush-rear (recessed) mounting
            • 1.6.2.3.4.1 Attaching the front brackets to the rear of the device
            • 1.6.2.3.4.2 Attaching the extensions to the front of the device
            • 1.6.2.3.4.3 Installing the device in the rack
            • 1.6.2.3.4.4 Attaching the rear brackets to the extensions at the front of the device
            • 1.6.2.3.4.5 Attaching the rear brackets to the front rack posts
      • 1.6.3 Wall mount installation
    • 1.7 Connecting devices in a traditional stack
      • 1.7.1 Stacking ports and trunks
      • 1.7.2 Stacking configuration requirements
      • 1.7.3 Traditional stack size
      • 1.7.4 Stacking topologies for a traditional stack
    • 1.8 Powering on the system
    • 1.9 Long-reach multimode adapter module

Time and Items Required

Allow 15 to 30 minutes to complete this procedure.

The following items are required to install the device using the 1U, 1.5U, and 2U Universal Kit for Four-Post Racks:

  • #2 Phillips torque screwdriver
  • 1/4-inch slotted-blade torque screwdriver
Parent topic: Installing the 1U, 1.5U, and 2U Universal Kit for Four-Post Racks (XBR-R000295)

Did you find what you were looking for?

Thanks!

Ruckus Wireless

© 2026 Ruckus Wireless LLC All rights reserved.

  • Accessibility
  • Privacy & Cookies
  • Do Not Sell My Information
  • Trademarks
  • Terms
  • Feedback