Displaying information for breakout ports
The
show breakout command indicates which ports are configured for breakout and which breakout ports
are in operation. The command also displays ports that have been configured for breakout
but that are not yet broken out into sub-ports, pending reload.
The following example displays breakout port information.
Device# show breakout Unit-Id: 1 Port Module Exist Module Conf breakout_conf breakout_oper 1/1/1 Yes No No No 1/1/2 Yes No No No 1/1/3 Yes No No No 1/1/4 Yes No No No 1/1/5 Yes No No No 1/1/6 Yes No No No 1/1/7 Yes No No No 1/1/8 Yes No No No 1/1/9 Yes No Yes Yes 1/1/10 Yes No No No 1/1/11 Yes No No No 1/1/12 Yes No No No 1/2/1 Yes No No No 1/2/2 Yes No No No 1/2/3 Yes No No No 1/2/4 Yes No No No 1/2/5 Yes No Yes Yes 1/2/6 Yes No No No 1/2/7 Yes No No No 1/2/8 Yes No No No 1/2/9 Yes No No No 1/2/10 Yes No No No 1/2/11 Yes No No No 1/2/12 Yes No No No 1/3/1 Yes No No No 1/3/2 Yes No No No 1/3/3 Yes No No No 1/3/4 Yes No No No 1/3/5 Yes No No No 1/3/6 Yes No No No 1/3/7 Yes No No No 1/3/8 Yes No No No