-
System-Max Changes and uRPF
Last Updated
Sep 03, 2026
System-Max Changes and uRPF System-Max Changes and uRPF System-Max Changes and uRPF The following tables describe the system-max values with and without uRPF configured on the device. Note that the values with uRPF configuration after reload are reduced by half. For ICX 7550 and ICX 7850, values
-
RUCKUS FastIron Layer 3 Routing Configuration Guide, 10.0.10
Last Updated
Sep 03, 2026
device receives an ARP request from the device that has the entry address. The maximum number of static ARP entries you can configure depends on the FastIron release running on the device. Static ARP Entry Support Device Default Number of ARP Entries Maximum Number of ARP Entries ICX 7150 64 256 ICX 7550 512 6000 ICX 7650 512 1024 ICX 7850 512 1024 ICX 8100 512 2048 ICX 8200 512 2048
-
Static ARP
Last Updated
Sep 03, 2026
device receives an ARP request from the device that has the entry address. The maximum number of static ARP entries you can configure depends on the FastIron release running on the device. Static ARP Entry Support Device Default Number of ARP Entries Maximum Number of ARP Entries ICX 7150 64 256 ICX 7250 512 2048 ICX 7450 512 6000 ICX 7550 512 6000 ICX 7650 512 1024 ICX 7850 512 1024
-
Specifying IPv6 SNMP Parameters
Last Updated
Sep 03, 2026
IPv6 host address. device# configure terminal device(config)# snmp-server host ipv6 2001:DB8:89::13 mypublic port 200 device(config)# write memory device(config)# management source-interface ethernet 1/2/1 protocol snmp device(config)# snmp-server enable traps holddown-time 40 The following RUCKUS ICX devices support IPv6 for SNMPv3: ICX 7150, ICX 7250, ICX 7450, ICX 7550, ICX 7650, and ICX 7850.
-
system-max pim6-hw-mcache
Last Updated
Sep 03, 2026
1024; the default is 512. Global configuration mode You can use the max-mcache command to define the maximum number of repeated PIM traffic sent from the same source address and received by the same destination address. For ICX 7850 and ICX 7550 devices, values are used from the forwarding profile and
-
Enabling the Flooding of Unregistered IPv4 Multicast Frames in an IGMP-Snooping-Enabled VLAN
Last Updated
Sep 03, 2026
. Enabling the flooding of unregistered IPv4 multicast frames in an IGMP-snooping-enabled VLAN is supported on the following platforms: RUCKUS ICX 8100 (standalone) RUCKUS ICX 8200 (standalone and stacking) RUCKUS ICX 7850 (MCT, standalone, and stacking) RUCKUS ICX 7650 (MCT, standalone, and stacking
-
xSTP - Spanning Tree Protocols
Last Updated
Sep 03, 2026
xSTP - Spanning Tree Protocols xSTP - Spanning Tree Protocols xSTP - Spanning Tree Protocols Feature ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 IEEE 802.1s Multiple Spanning Tree 08.0.95 08.0.70 08.0.90 10.0.10f 10.0.00 IEEE 802.1s Multiple Spanning Tree enhancement (MSTP+) 08.0.95 08.0.70
-
OAM - Operations, Administration, and Maintenance
Last Updated
Sep 03, 2026
OAM - Operations, Administration, and Maintenance OAM - Operations, Administration, and Maintenance OAM - Operations, Administration, and Maintenance Feature ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 Diagnostic error codes 08.0.95 08.0.70 08.0.90 10.0.10f 10.0.00 IPv4 and IPv6 ping 08.0.95
-
OSPF - IPv4 Open Shortest Path First
Last Updated
Sep 03, 2026
OSPF - IPv4 Open Shortest Path First OSPF - IPv4 Open Shortest Path First OSPF - IPv4 Open Shortest Path First Feature ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 OSPF v2 08.0.95 08.0.70 08.0.90 No 10.0.00 Graceful restart In a stack configuration only. 08.0.95 08.0.70 08.0.90 No 10.0.00 Graceful
-
OpenFlow
Last Updated
Sep 03, 2026
OpenFlow OpenFlow OpenFlow Feature ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 OpenFlow 1.0 10.0.20 08.0.70 08.0.95 No 10.0.00 OpenFlow 1.3 10.0.20 08.0.70 08.0.95 No 10.0.00 OpenFlow enabled on per-port basis (Hybrid switch mode) 10.0.20 08.0.70 08.0.95 No 10.0.00 OpenFlow Layer 3 Hybrid Port