Ruckus Controller AP Client Table

The following MIBs define the information for the controller Client table (ruckusCtrlApClientTable) for users to easily access basic information of all the clients in a specific AP. Using the ClientMac in this table, users can go to Client table to get more details about this client. The index of the table is the ApMac.

Caution: These tables are designed for debugging specific wired clients for a period of time. It is recommended that you do not use this for periodic and long time monitoring.
Note: It is recommended to use Public API or GPB/MQTT to obtain similar information for monitoring purposes.

To query:

  • all clients in a specific ap1, the following command can be used:
    snmpwalk ruckusCtrlApClientTable.ap1
  • all information, use the command format:
    snmpwalk {option} ruckusCTRLSummaryApTable
  • all AP MAC in domain1, use the command format:
    snmpwalk {option}ruckusCtrlSummryApMac.domain.{domain1 UUID}
  • A MAC address of C8:AA:7C:8E:67:C4 must be translated to the equivalent decimal value of 202.170.124.142.103.196 for the query.
    snmpget -v2c -c public <ip_addr> RUCKUS-CTRL-MIB::ruck- usCtrlApClientMac.6.202.170.124.142.103.196, where the
    length of the string index is always 6.
    202.170.124.142.103.196: MAC Address C8:AA:7C:8E:67:C4
    in decimal form
  • The MIB browser should translate the MAC address into decimal form as:
    .1.3.6.1.4.1.25053.1.8.1.1.1.1.9.1.6.6.202.170.124.14
    2.103.196
    200.170.124.142.103.196: MAC Address C8:AA:7C:8E:67:C4
    in decimal form