Overview

This document describes the SNMP Management Information Base (MIB) that the controller supports. It also describes overall design of the controller SNMP agent.

The controller SNMP agent allows its northbound portal application to monitor the system via SNMP GET operation and also notifies the critical events by sending traps. The controller supports v2 community and v3 versions of SNMP. It also supports configuring the system via SNMP SET operation. See Updating AP SNMPv2 and SNMPv3 Configuration Flow and SNMP Logs.

Note: For information on how to enable SNMP traps and configure the SNMP v2 and v3 settings on the controller web interface, refer to the SmartZone Administrator Guide.

Note: Refer Terminology topic for terms used in this guide.

Note: For details on alarms and events refer to SmartZone Alarms and Events Guide.