show tunnel-mgr protect

Displays tunnel protection configurations associated with all tunnels or a specific tunnel in the Tunnel Manager database.
Syntax
show tunnel-mgr protect [ tunnel-id id ]
Command Default

No command default.

Parameters
tunnel-id id
Specifies to display the tunnel protection configuration associated with a specific tunnel.
Modes

Network mode

The show tunnel-mgr protect command displays the following information.

Output field Description
Tunnel Protection Displays the status of tunnel protection (enabled or disabled).
Tunnel-Id Identifier of the tunnel.
Peer-tunnel-id Identifier of the peer tunnel.
Output-SA The Security Association (SA) used for outbound (encrypted) traffic.
Input-SA The Security Association (SA) used for inbound (decrypted) traffic.
Examples

The following example shows tunnel protection details associated with all tunnels.

Network# show tunnel-mgr protect
Tunnel Protection: Enabled
Tunnel-Id  Peer-tunnel-id  Output-SA  Input-SA
        1               1        206       205

The following example shows that no tunnel protection configuration exists for the specified tunnel.

Network# show tunnel-mgr protect tunnel-id 1
Tunnel Protection: Enabled
show tunnel-mgr: No Tunnel Protect exists for tunnel-id=1
History
Release version Command history
2.5.0 This command was introduced.