show multi-wan policy

Displaysthe configuration details and status of the Multi-WAN Policy on the RUCKUS Edge device.
Syntax
show multi-wan policy
Modes

Network mode

The show multi-wan policy command displays the following information.

Output field Description
Multi-WAN Policy Displays the name or identifier of the Multi-WAN policy configured.
Multi-WAN Mode Shows the operational mode of the policy.
Links Displays the interface used in the policy.
swindex Internal switch index assigned to each interface.
Role Displays the designated interface role.
Prio Specifies the priority level for failover or traffic routing.
State Indicates the current operational status of the link.
DNS Shows the DNS reachability.
Examples

The following example displays the Multi-WAN Policy, Multi-WAN Mode, links, switch index, role, priority, state, and DNS.

DBGvpp# show multi-wan policy
Multi-WAN Policy: b33329bd-d38e-4816-8215-1a54481b11c4
Multi-WAN Mode  : Active/Backup
--------------------------------------------------------
Links                      swindex  Role       Prio  State      DNS
--------------------------------------------------------
port1                     1        WAN        1     Up
port2                     2        WAN        2     Up
port3                     3        Unknown    -1    Up
tap0                      4        Host-TAP   -1    Up
History
Release version Command history
2.4.0 This command was introduced.