show sdlan info

Displays the current VLANs which are serviced by the SD-LAN.
Syntax
show sdlan info
Modes

Network mode

The show sdlan info command displays the following information.

Output field Description
Total VLANs Total number of VLANs currently bridged by SD-LAN.
VLAN VLAN identifier.
Type Whether the VLAN is created dynamically (due to reception of traffic).
BD_ID Identifier of the bridge-domain for this VLAN.
Uplink-Port Uplink port. If the VLAN traffic has to be bridged on core-port, uplink port will be a 802.1q sub-port on the core-port. If the VLAN traffic has to be tunneled to another Edge cluster, uplink port will be a tunnel port.
AP-Tunnels Number of AP tunnels for this VLAN. This indicate number of APs which have UEs assigned this VLAN and thus tunneling VLAN traffic to Edge.
Peer-Tunnels Number of tunnels to other RUCKUS Edge device for this VLAN.
Access-Clients Number of tunnels connected to clients for this VLAN.
Uplink-Clients Number of MACs that are learned on uplink ports for this VLAN.
Examples

The following example displays the SD-LAN operation information on a Data Center Edge device.

vpp# show sdlan info

Total VLANs: 2
VLAN   Type      BD-ID  Uplink-Port      AP-Tunnels   Peer-Tunnels  GRE-Subints  Access-Clients  Uplink-Clients
131    dynamic   131    gre1.131         1            0              1           1               1
200    dynamic   200    gre0.200         1            0              1           0               1
Pls provide an output for this example

The following example displays the SD-LAN operation information on a DMZ Edge device..

Network# show sdlan info
  
Total VLANs: 5 
VLAN   Type      BD-ID  Uplink-Port           A-Tunn-Cnt   P-Tunn-Cnt   Clnts-Cnt
10     dynamic   10     port1.10              617           0             5942
16     dynamic   16     gre0.16               0             0             1234
50     dynamic   50     port1.50              353           1             78 
History
Release version Command history
2.4.0 Supporting GRE tunnel subports.
2.1.0 Supporting multi-venue feature.
1.0.0 This command was introduced.