show resource-config

Displays the current resource allocation.
Syntax
show resource-config
Modes

Resource Manager mode

Usage Guidelines

This command is supported only on the RUCKUS Edge device.

Examples

The below example displays the resource allocation in the RUCKUS Edge device.

(resource-manager)# help resource-manager configuration
Available Commands:
exit Exit the system mode. help Help about any command
set	set resource-manager configuration show show resource-manager information
(resource-manager)# show -h
show resource-manager information
resource-config	show current resource-manager configuration 
(resource-manager)# show resource-config
Resource Info:
=====================
Node Resources:
  	   CPU:
             Allocatable: 4000m
             Unallocated: 0m
          Memory:
             Allocatable: 5648 MiB
             Unallocated: 3600 MiB
         Configured Resources:
          System CPU resource: 1000m
          Data-Plane CPU resource: 3000m
         Applied Resources:
          Application Name: System
            Utilized CPU: 1000m
            Attached with CPU ID: 0
          Application Name: Data-Plane
            Utilized CPU: 3000m
            Control plane CPU resource: 250m
            Data plane CPU resource: 2750m
            Utilized Memory: 2048 MiB
            Attached with CPU IDs: 1-3

History
Release version Command history
2.3.0 The show resource manager command is moved from Network mode to resource-manager mode and the CLI is changed to show resource-config.
1.0.0 This command was introduced.