show arpterm neighbor

Displays the list of IPv4 or IPv6 neighbors learned and added to the ARP Termination table, with the most recently added neighbor listed first.
Syntax
show arpterm {ipv4 | ipv6} neighbor
Command Default

No command default.

Parameters
ipv4
Specifies to display the list of IPv4 neighbors in the ARP Termination table.
ipv6
Specifies to display the list of IPv6 neighbors in the ARP Termination table.
Modes

Network mode

The show arpterm ipv4 neighbor and show arpterm ipv6 neighbor commands displays the following information.

Output field Description
Timestamp Displays the time at which the entry was added into the ARP Termination table, formatted as mm/dd/yyyy hh:mm:ss XM.
TTL(secs) Displays the time remaining in seconds before the entry is aged out and removed from the table.
IP Displays the IP address of the ARP requester or responder.
Flags Displays concatenated single-character flags that denote how the entry was learned and its current status in the table.
Ethernet Displays the MAC address of the Ethernet interface found in the ARP Request and Response packets for the identified IP address.
BD Displays the Bridge-Domain object identifier in the data plane of the RUCKUS Edge device.
Flags Legend Explains the meaning of each flag:
  • S = static: Statically configured through CLI (not supported in the RUCKUS One GUI feature configuration)
  • D = dynamic: Dynamically learned via ARP snooping.
  • P = pending
  • A = stale: Stale after expiration (intermediate state normally never visible)
  • Q = request snooping: Learned via snooping of ARP Request packets
  • R = reply snooping: Learned via snooping of ARP Response packets.
Usage Guidelines

This command is supported only on the RUCKUS Edge device.

Examples

The following example displays the ARP Termination IP/MAC bindings for learned IPv4/IPv6 neighbors only. It includes the IP and MAC addresses, the registration time, the remaining time-to-live (TTL), the flags indicating the state or generation method of the binding, and the bridge domain (BD) where the binding is learned. The Flag Legend explains the flags. Dynamically learned from ARP Request (DQ) and Dynamically learned from ARP Reply (DR) denote dynamically learned bindings from ARP Request and Reply, respectively.

Edge# network 
Network# show arpterm ipv4 neighbors 
            Timestamp             TTL(secs)                    IP                    Flags      Ethernet        BD  
     01/16/2025 11:55:54 PM         507.5772              192.168.50.3                DQ    ac:67:5d:ee:50:70   50 
     01/16/2025 11:55:53 PM         506.1948              192.168.50.1                DR    08:35:71:11:d9:8d   50 
     01/16/2025 11:55:53 PM         506.1948              192.168.50.6                DQ    68:3e:26:6c:c9:6a   50 

Flags legend:
        S = static
        D = dynamic
        P = pending
        A = stale
        Q = request snooping
        R = reply snooping
Edge# network
Network# show arpterm ipv6 neighbor
            Timestamp             TTL(secs)                    IP                    Flags      Ethernet        BD  
     01/16/2025 11:55:55 PM         485.9289        fe80::7b25:462f:2c6d:a5bc         DQ    ac:67:5d:ee:50:70   50  
     01/16/2025 11:55:54 PM         484.7853        fe80::82e1:6069:3289:4346         DQ    68:3e:26:6c:c9:6a   50  
Flags legend:
        S = static
        D = dynamic
        P = pending
        A = stale
        Q = request snooping
        R = reply snooping
History
Release version Command history
2.3.0 This command was introduced.